Ezodo PL-700PC - Store and Recall Mode

14
MAX/MIN mode:
1. Press and hold button until the display appear
flashing MAX and MIN icons to enter MAX/MIN. Press
lightly to browse MAX and MIN value during this
mode.
2. To exit this mode, press and hold button again
until the flashing MAX and MIN icons disappear and
return to measuring mode.
Store and Recall mode:
1. In measuring mode, press to store the current
reading. The Store icon and the ordinal of this record
will appear on the display.
2. Press and hold for 3 sec. to enter Recall mode.
In this mode, use or to browse records.
Press and hold to exit this mode and return to
measuring mode.
3. In Recall mode, press together for 3 sec.
to clean all the records in the memory.