Ezviz C4W User Manual

7
Appendix
Install Memory Card
Insert a microSD card into the slot until a click.
Initializing Memory Card
1. In the EZVIZ app, check the memory card status by tapping on the Storage Status in
the Device Settings interface.
2. If the memory card status displays as Uninitialized, tap to initialize it. The status
will then change to Normal.
For detailed information, please visit www.ezvizlife.com.

Ezviz C4W Specifications

General

Type	IP security camera
Certification	UL / FCC / CE / WEEE / REACH
Day/night mode	Yes
Placement supported	Outdoor
Connectivity technology	Wireless
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet interface type	Fast Ethernet
Supported network protocols	Security 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
Built-in HDD	No
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	256 GB
Ethernet LAN (RJ-45) ports	1
Form factor	Dome
Mounting type	Ceiling
Product color	White
Protection features	Dust resistant, Water resistant
International Protection (IP) code	IP67
Camera pan control	-
Minimum illumination	- lx
DC output current	1 A
DC output voltage	12
Power consumption (max)	6 W
Sensor type	CMOS
Optical sensor size	1/2.7 \
Operating temperature (T-T)	-30 - 60 °C
Operating relative humidity (H-H)	0 - 95 %
Fixed focal length	2.8 mm
LED type	IR
Night vision distance	30 m
Total megapixels	- MP
Maximum resolution	1920 x 1080 pixels
Supported video modes	1080p
Video formats supported	H.264, H.265
Noise reduction technology	3D noise reduction
Sustainability certificates	RoHS
Audio system	2-way

Weight and Dimensions

Height	95 mm
Weight	330 g
Diameter	105 mm
Package depth	145 mm
Package width	147 mm
Package height	173 mm