Ezviz C8C Lite User Manual

3
Ethernet Cable
- Log in to your account using the EZVIZ app.
- On the Home screen, tap “+” on the upper-right corner to go to the Scan QR
Code interface.
- Scan the QR code on the Quick Start Guide cover or on the body of the
camera.
- Follow the wizard to add the camera to the EZVIZ app.
Installation
1. Install the Micro SD Card (Optional)
- Rotate the camera counterclockwise.
- Remove the cover on the camera.
- Insert the micro SD card (sold separately) into the card slot as shown in the
gure below.
- Place the cover back on.
- In the EZVIZ app, tap the Storage Status in the Device Settings interface to
check the SD card status.
- If the memory card status displays as Uninitialized, tap to initialize it. The
status will then change to Normal and it can store videos.

Ezviz C8C Lite Specifications

General

Brand	Ezviz
Model	C8C Lite
Category	Security Camera
Language	English