6
Maintenance
1� Charge the Panel
Connect the panel with the power outlet via power adapter (5V 2A, sold separately).
• Do not charge through the interface at the bottom.
• You can also charge the panel via portable charger and hang it on the hook.
• Please do not charge the device when the temperature exceeds 45 degrees or below 0 degrees.
Power Outlet
Power Adapter
2� Restore to Factory Settings
Tap Settings -> Firmware -> Default and cofirm to restore the device to factory settings.
All configuration will be restored to factory
settings. Continue?
Cancel Confirm
To Next Page
Loading...
