F Care Systems EVRF - Output Characteristics

MANUAL THERMOCOAGULATION - EVRF
Date
26/06
/20
18
Page 12 of 34 Revision N° : 18
The number of impulse per session.
Type BF device.
CE marking.
Read manual before use.
U
Allowed voltage.
FREQ
Frequency.
P
Maximum power.
2.3 Output characteristics
This apparatus generates some high frequencies impulses whose characteristics are:
 Frequency of the wave : 4 MHz.
 Max voltage in output : 660V.
 Max time of impulse : 0,8s.
 Continuous mode.
2.4 Label explanation
1: Type BF apparatus.
2: Name + address of fabricant.
3: CE number.
4: Read operating manual before usage.
5: Model/apparatus name.
6: Serial number.
7: Technical specifications.
2.5 Functioning
The apparatus works in the following environment:
 Room temperature between +10°C and + 40°C.
 Relative dampness comprised between 30% and 80%, condensation comprised.
 Atmospheric pressure comprised between 700 hPa and 1060 hPa.
The power supply cannot exceed a voltage of 230V~+-10% of the rated voltage.