F Care Systems EVRF - Foot Pedal; Output Cable; Cable; Needle-Holder Pen (with Connection Cable)

MANUAL THERMOCOAGULATION - EVRF
Date
26/06
/20
18
Page 18 of 34 Revision N° : 18
4.3.1 Foot pedal
The foot pedal permits to activate the high frequency impulses.
It connects the blue connector with the EVRF.
4.3.2 Output cable
Cable used to connect the apparatus to the needle
holder or catheter CR30KAB.
4.3.3 3M cable
Cable used to connect the neutral electrode (3M
pad) to the apparatus.
4.3.4 Needle-holder pen (with connection cable)
To be used in combination with the sterile K3i or K6i
needles.
When linked to the apparatus, it permits to transmit
the high frequency impulses through the needle for
treatment of telangiectasia.