FAAC 620 Series - User Manual

C
E
R
M
E
T
A
Z
I
E
N
D
A
C
E
R
T
I
F
I
C
A
T
A
UNI EN ISO 9001-085
620 640 642
620 640 642
햲
ASSEMBLAGGIO SBARRA RETTANGOLARE PER MOD. :
620 STANDARD - 620 RAPIDA - 620 SR - 642 STD/40 - 642 R/40.
RECTANGULAR BEAM ASSEMBLY FOR MOD. :
620 STANDARD - 620 RAPID - 620 SR - 642 STD/40 - 642 R/40.
ASSEMBLAGE BARRE RECTANGULAIRE POUR MOD. :
620 STANDARD - 620 RAPIDE - 620 SR - 642 STD/40 - 642 R/40.
MONTAGE DES RECHTECKIGEN BALKENS FÜR MOD. :
620 STANDARD - 620 SCHNELL - 620 SR - 642 STD/40 - 642 R/40.
ENSAMBLE BARRA RECTANGULAR PARA EL MOD. :
620 ESTANDAR – 620 RAPIDA – 620 SR – 642 STD/40 – 642 R/40.
햲
ASSEMBLAGGIO SBARRA TONDA PER MOD. :
620 STANDARD - 620 RAPIDA - 620 SR - 642 STD/40 - 642 R/40.
ROUND BEAM ASSEMBLY FOR MOD. :
620 STANDARD - 620 RAPID - 620 SR - 642 STD/40 - 642 R/40.
ASSEMBLAGE BARRE RONDE POUR MOD. :
620 STANDARD - 620 RAPIDE - 620 SR - 642 STD/40 - 642 R/40.
MONTAGE DES RUNDEN BALKENS FÜR MOD. :
620 STANDARD - 620 SCHNELL - 620 SR - 642 STD/40 - 642 R/40.
ENSAMBLE BARRA REDONDA PARA EL MOD. :
620 ESTANDAR – 620 RAPIDA – 620 SR – 642 STD/40 – 642 R/40.
햳
햳
햴
732327 Rev. B
ASSEMBLAGGIO SBARRA RETTANGOLARE PER MOD. :
640 - 642/70.
RECTANGULAR BEAM ASSEMBLY FOR MOD. :
640 - 642/70.
ASSEMBLAGE BARRE RECTANGULAIRE POUR MOD. :
640 - 642/70.
MONTAGE DES RECHTECKIGEN BALKENS FÜR MOD. :
640 - 642/70.
ENSAMBLE BARRA RECTANGULAR PARA EL MOD. :
640 - 642/70.
햴

Summary

Rectangular Beam Assembly

Models 620;642 Rectangular Beam

Assembly instructions for rectangular beams on models 620 Standard, 620 Rapida, 620 SR, 642 STD/40, 642 R/40.

Round Beam Assembly

Models 620;642 Round Beam

Assembly instructions for round beams on models 620 Standard, 620 Rapida, 620 SR, 642 STD/40, 642 R/40.

Model 640;642 Rectangular Beam Assembly

640;642 Rectangular Beam

Assembly instructions for rectangular beams on models 640 and 642/70.

Swing Out Round Beam Assembly

Models 620;642 Swing Out Round Beam

Assembly instructions for swing-out round beams on models 620 Standard, 620 Rapida, 620 SR, 642 STD/40, 642 R/40.

Beam Perpendicularity Adjustment

Adjusting Beam Perpendicular Position

Procedure to adjust beam perpendicularity by turning screw A and fixing nut B.

Sensor Mounting and Safety

Sensor Installation

Instructions for mounting the sensor, including drilling a 10mm hole at position A.

Dangerous Area Warning

Safety warning about a dangerous area, advising not to stop in the vicinity.

FAAC 620 Series Specifications

General

Model	FAAC 620 Series
Category	Automatic Barriers
Motor Power	220W
Absorbed Current	1A
Operating Temperature	-20°C to +55°C
Protection Class	IP54
Duty Cycle	100%
Max Beam Length	6 m
Usage Frequency	Intensive Use
Control Options	access control systems
Safety Features	Photocells
Power Supply	230V AC ±10%, 50/60Hz