FAAC 620 - Control Logics Operation; Adjustment of Transmitted Torque; Adjustment of Stroke End Deceleration

Page 10
January, 2007
620/640 Operator And
624BLD Control Panel Installation Manual
B
D
C
A
E
Depth:
s
:
n
.
Old Style New Style
620 Dimensions 620 Dimensions
A (rectangle): 12 1/16 x 2 1/16 in.
Between bolts
B: 11 1/2 in.
C: 3 1/2 in.
Edge to edge
D: 6 in.
E: 13 3/4 in.
A (rectangle): 13 3/8 x 3 1/8 in.
Between bolts
B: 12 1/2 in.
C: 5 1/8 in.
Edge to edge
D: 9 in.
E: 15 1/4 in.
640 Dimensions 640 Dimensions
F
G
H
J
Entire plate, edge to edge:
14 1/16 x 7 7/8 in.
Hole diameter: 2 1/4 in.
Distance from hole to edge:
F: 2 3/4 in.
G: 1 1/4 in.
H: 2 3/4 in.
J: 10 5/8 in.
Entire plate, edge to edge:
15 1/4 x 9 1/16 in.
Hole diameter: 2 1/4 in.
Distance from hole to edge:
F: 3 1/2 in.
G: 1 1/4 in.
H: 3 1/2 in.
J: 12 in.
American Style Italian Style
Figure 7. Positive Stop Location and Adjusters
Figure 5. FAAC foundation Plates for the 620/640 Barrier
Vent Screw
Location
Oil Fill with Built in
Dipstick
Figure 6. Oil Fill and Vent Screw Locations