X 1
X 1
X 1
+
ENGLISH
3
STEPS TO PERFORM
MOTOR RESPONSE
1
TRAVEL LIMIT UP
Press the button that controls ascent ( or ) , go to travel limit up.
Press the stop/preferred position push-button for 2 seconds, release it for
1 second, and keep pressed again until the motor moves briefly in both
directions.
2
TRAVEL LIMIT DOWN
Press the button that controls descent ( or ) ,go to travel limit down
and release the push-button.
Press the stop/preferred position push-button until the motor moves briefly
in both directions.
3.3 SETTING THE ROLLER SHUTTER TRAVEL LIMIT IN MANUAL MODE
CONFIRM
CONFIRM
2 SECONDS
5 SECONDS
5 SECONDS
It is possible to reverse the time order of the travel limit setting sequence, starting from step 2 and
then performing step 1.
CHECK WHICH KEY CONTROLS UP, AND KEEP IT PRESSED, WITHOUT RELEASING IT,
UNTIL IT ARRIVES IN THE DESIRED TRAVEL LIMIT DOWN POSITION. SIMULTANEOUSLY PRESS
THE STOP/PREFERRED POSITION KEY TO CONFIRM THE POSITION UNTIL THE MOTOR
PERFORMS THE INDICATED MOVEMENTS
3.2 SETTING THE ROLLER SHUTTER TRAVEL LIMIT IN SEMI-AUTOMATIC MODE
X 1
TRAVEL LIMIT
DOWN
OR
To Next Page
Loading...
