EN
1
17
MAINTENANCE
Grease filter
The filter must be cleaned every 2 months of operation, or more
frequently for particularly heavy usage, and can be washed in a
dishwasher.
CLEANING METAL SELF- SUPPORTING GREASE FILTER
! Open the lighting unit by pulling on the nocth.
! Remove the filter one by one pushing it towards the back side
of the hood unit and simultaneously pulling downwards.
! Any kind of bending of the filter has to be avoided when wash-
ing it. Before fitting it again into the hood make sure that it is
completely dry.
! When fitting the filter into the hood pay attention that they are
mounted in correct position the handle facing outwards.
! Replace the lighting unit.
Activated Charcoal Filter (Recirculation Version)
This cannot be washed or regenerated, and must be changed ap-
proximately once every 4 months, or more frequently in the case
of particularly intensive use.
CHANGING
! Open the light unit.
! Remove grease filter.
! Remove the saturated Activated Charcoal Filters, as indicated
(A).
! Fit the new Filters, as indicated (B).
! Fit the anti-grease filter and the Light Unit back into position.
A
B
Lighting unit
Warning: This appliance is fitted with a white LED lamp classed
as 1M according to EN 60825-1: 1994 + A1:2002 + A2:2001
standards; maximum optical power emitted @439nm: 7µW. Do
not look directly at the light through optical devices (binoculars,
magnifying glasses•).
• For replacement contact technical support. ("To purchase con-
tact technical support")
To Next Page
Loading...
