Need help?Do you have a question about the Faber MATRIX EG10 X A90 ACTIVE and is the answer not in the manual?
General| Category | Ventilation Hood |
|---|---|
| Model | MATRIX EG10 X A90 ACTIVE |
| Type | Wall-mounted |
| Width | 90 cm |
| Number of Motors | 1 |
| Lighting | LED |
| Control Type | Electronic |
| Filter Type | Metal Grease Filter |
| Energy Class | A |
| Material | Stainless Steel |
Correct installation procedures, safety distances, and electrical grounding requirements.
Diagrams illustrating the physical dimensions of the extractor hood.
List of the main product components with their part numbers and quantities.
List of hardware and parts required for the installation process.
Precise instructions for marking, drilling holes, and securing mounting brackets to the wall.
Procedure for attaching the main body of the hood to the previously installed brackets.
Instructions for connecting the hood to an external exhaust system via a duct.
Instructions for setting up the hood for air recirculation with filters.
Steps involved in assembling and fitting the upper and lower chimney sections.
Guidance on safely connecting the appliance to the mains electrical power.
Explanation of each button on the control panel and its respective display indicator.
Information on operating the optional remote control and handling its batteries.
Instructions for opening and cleaning the removable ducting panels.
Guidance on cleaning metal grease filters and resetting related alarms.
Step-by-step instructions for removing, washing, drying, and re-installing the grease filters.
Details on the activated charcoal filter for recirculation, including alarm and replacement.
How to activate the filter saturation alarm for the activated charcoal filter.
Procedure for replacing the activated charcoal filter and resetting the alarm signal.
Step-by-step instructions for safely replacing the appliance's light bulbs.
To Next Page
