18 www.faberre.com
Remote Control
A multi-function remote control is included. The
remote control has a maximum range of 30 ft (9 m).
Icon Description
1
O
|
Main switch: Toggle ON/OFF.
(1 beep will be heard.)
2
Press to activate (ON).
(1 beep will be heard.)
Press again to turn OFF.
3
Press multiple times to reduce the
ame height.
4
Press multiple times increase the
ame height.
5
Press multiple times to reduce the
re crackling sound.
6
Press multiple times to increase
the re crackling sound.
Pairing Remote
Connect (pair) the remote control to the control box
and use the remote to turn the replace ON/OFF,
adjust the ame height, and adjust the re crackling
sound volume.
To pair the remote and control box:
1. Turn the main switch on the control box to the ON
position. (The control box beeps once.)
2. Press the Main button [ ] on the control box to
start the fire. (The control box beeps once.)
3. Press the pairing button [ ] on the control box
to start the fireplace. (The control box beeps once
and the icon LEDs blink on and off.)
4. Press the Main button [ ] on the remote control
to turn the fireplace off.
When the remote control is paired, check if all the
remote control functions are available from the
desired distance.
5. If needed, move the receiver to a different
position inside or outside the construction.
!
NOTE: The receiver is located at the back inside
of the replace unit. The receiver has a cable
length of 4.4 ft (1.4 m).
Operation
To Next Page
Loading...
Need help?
General
