Fac C3 - Nameplates and Conformity Markings

15
EN
For any spare part orders, do NOT consider the numbering in this
manual, but refer only to the “spare parts” exploded diagram (page
27).
MAIN COMPONENTS
1. Appliance body.
2. Feet.
3. Cover opening lever.
4. Lever locking knob.
5. Pot.
6. Cover.
7. Inlet duct.
8a. Multi-purpose blade.
8b. Thin meat mincing blade (optional).
8c. Holed mixing blade (optional).
9. Metal tube.
10. Microswitch for pot detection.
11. Microswitch for correct pot positioning.
12. Magnetic microswitch for cover in position.
13. Start button “I” (model “C3”).
14. “STOP” button “0” (model “C3”).
15. Appliance power light.
16. Continuous starting button “START“ (models “C5” and “C8”).
17. Pulsed starting button “T“ (models “C5” and “C8”).
18. “STOP” button (models “C5” and “C8”).
19. Blade speed changer (optional) (models “C5” and “C8”).