CE CONFORMITY MARKING AND LABELS
The appliance described in this manual is manufactured in compliance with the current
EC Directives and subsequent amendments. All its component parts are adapted to the
requirements of the EC Directives and the CE marking demonstrates its compliance.
The identication plate bearing the manufacturer’s name, the technical data and the CE
marking is located on the cutter base.
The above mentioned plate may not be removed and must always be legible.
If the plate is worn or damaged, the user is obliged to replace it.
Persons authorised to make the electrical connection must check that the characteristics
of the power line correspond to what is indicated on the identication plate.
Other labels are applied on the appliance and must be replaced if they are damaged or
illegible.
To Next Page
Loading...
