PROBLEM CAUSES SOLUTIONS
The appliance does not
start.
The main switch is off. Turn on the main switch.
No power on the power
supply line.
Contact the dealer or an
authorised service centre.
The pot is not properly
positioned.
Check that the pot is
properly positioned.
The pot cover is not properly
closed.
Check that the cover is
properly closed.
The blade turns in the wrong
direction.
The power phase cables
of the appliance are not
connected correctly.
Have the electric cables
inverted by a qualified
technician.
TROUBLESHOOTING
• The aim of the information provided below is to help you identify and correct any faults
and malfunctions that may occur during use of the appliance.
☞
Some faults can be resolved by the user, others require specic
technical skills and must be carried out exclusively by qualied
persons with recognised experience in the specic sector of
operation
Do not remove internal parts of the appliance.
The manufacturer declines all responsibility for any damage
caused by tampering.
To Next Page
Loading...