Fac C3 - Installation and Preliminary Checks; Installation Procedure; Electric Connection

22
EN
• Only for models “C5” and “C8”:
press the “T” button (17) to start the pulsed blade; releasing the button, the blade stops.
• If necessary, add other foods through the inlet duct (7).
☞
If the motor struggles to run, reduce the amount of food
processed.
• Only for models “C5” and “C8” with optional speed changer:
adjust the blade rotation speed with the speed changer (19).
• Prolonged operation of the appliance will reduce the processed foods to pulp.
• When the processed food has reached the desired consistency, stop the blade by
pressing the dedicated button (“0” for model “C3”; “STOP” for models “C5” and “C8”).
The power light (15) goes off.
• Turn the knob (4) anticlockwise (see the illustration on page 23).
START
S
T
O
P
“C5”
“C8”
“C3”
14
15
13
19
15
17
18
16