Facilis Hub Server - Page 13

13
 ATTO Configuration Tool
 Facilis Hub Admin Console
The Facilis Hub Admin Console is a web browser based user interface for connecting to
and administering one or more Facilis TerraBlock servers.
Hub Admin Console allows for user and volume management of all volume types.
Hub Admin Console can be accessed from any Supported Web Browser (see Web
Console documentation for more details) by navigating to http://localhost on the Hub
Server or http://Hub_IP_Address on a client.
 SMDriveMonitor
This tool is used to monitor the output of the service during operation. The
SMDriveMonitor will display the version, time/date of the service startup, any special
features licensed on the system, as well as the drives found in the disk set. The
SMDriveMonitor also displays any drive errors and any recovery or DynaRAID protection
activity, including the percentage of recovery while in progress.
 The SMDriveMonitor is launched from “C:\Program
Files\Facilis\TerraBlock\SMDriveMonitor.exe” or the yellow desktop shortcut.
 SMmanager
SMmanager tool is a command-line interface for the administration and management of
Hub volumes and users. It is suggested that SMmanager only be used at the
recommendation of, and with assistance from, Facilis Technical Support.
 SMmanager is launched from "C:\Program
Files\Facilis\TerraBlock\Utilities\SMmanager.exe" or the red desktop shortcut.
 ATTO Configuration Tool
Hub servers configured with Fibre Channel interface cards to connect to client stations or
a Fibre Channel switch will have the ATTO Configuration Tool pre-installed. ATTO HBAs
can be viewed and configured using this tool. The ATTO Configuration Tool will allow a
system administrator to set the Connection Mode, update firmware, and check ATTO
driver versions. See the current Release Notes for more information. This tool should be
installed on all client stations with fibre channel hardware.