Factory Cat 290 Series - Machine Specifications

350
POLY
3/16" STEEL
12" X 5"
12" X 4"
61" X 35"
35", 38", OR 45"
810 LBS.
1,320 LBS.
(2) 18 INCHES
DIRECT
35 INCHES
(2) 1.0 HP
350 RPM
350 RPM
(2) 28 INCH OR (2) 32 INCH
CHAIN
28 INCHES OR 32 INCHES
2.0 HP
800 RPM
800 RPM
0-250 LB.
(5) AUTOMATIC SETTINGS
38 GAL
0-1.75 GPM
40 GAL
1.0 HP
2.0 HP
2.0 INCHES
5.0 INCHES
70 INCHES
(4) 396 AH
UP TO 6 HRS.
36 AMP, 110 VOLT
2.0 HP, SEALED
0-5 MPH
DYNAMIC BRAKING
35 INCHES
45,000 FT/HR
58,000 FT/HR
3 YEARS
1 YEAR
10 YEARS
PAGE 3
290
POLY
3/16" STEEL
12" X 5"
12" X 4"
61" X 29"
32", 35", OR 38"
750 LBS.
1,260 LBS
(2) 15.5 INCHES
DIRECT
29 INCHES
(2) 1.0 HP
350 RPM
350 RPM
(2) 26 INCHES
CHAIN
26 INCHES
2.0 HP
800 RPM
800 RPM
0-200 LB.
(5) AUTOMATIC SETTINGS
38 GAL
0-1.75 GPM
40 GAL
1.0 HP
2.0 HP
2.0 INCHES
5.0 INCHES
70 INCHES
(4) 396 AH
UP TO 6 HRS.
36 AMP, 110 VOLT
2.0 HP, SEALED
0-5 MPH
DYNAMIC BRAKING
29 INCHES
35,000 FT/HR
47,000 FT/HR
3 YEARS
1 YEAR
10 YEARS
MO
DEL
BODY CONSTRUCTION/DIMENSIONS
TANK MATERIAL:
CHASSIS CONSTRUCTION:
REAR WHEELS:
FRONT WHEEL:
SIZE (L X W X H):
SQUEEGEE SIZE:
WEIGHT (WITHOUT BATTERIES):
WEIGHT (WITH BATTERIES):
BRU
SH/PAD SYSTEM
BRUSH/PAD DIAMETER (DISK):
DRIVE TO BRUSH (DISK):
SCRUBBING PATH (DISK):
BRUSH MOTOR POWER (DISK):
BRUSH MOTOR SPEED(DISK):
BRUSH SPEED (DISK):
BRUSH SIZE(CYLINDRICAL):
DRIVE TO BRUSH (CYLINDRICL):
SCRUBBING PATH (CYLINDRICAL):
BRUSH MOTOR POWER (CYLINDRICAL):
BRUSH MOTOR SPEED (CYLINDRICAL):
BRUSH SPEED (CYLINDRICAL):
BRUSH DOWN PRESSURE:
BRUSH ADJUSTMENT:
S
OLUTION SYSTEM
SOL. TANK CAP:
SOLUTION FLOW RATE:
R
ECOVERY SYSTEM
REC. TANK CAP:
VACUUM POWER (STANDARD):
VACUUM POWER (OPTIONAL):
DRAIN HOSE:
CLEANOUT DOOR (OPTIONAL)
WATERLIFT:
B
ATTERY SYSTEM
BATTERY AH RATING:
BATTERY RUN TIME:
CHARGER (AUTOMATIC):
D
RIVE SYSTEM
TRANSAXLE DESCRIPTION:
SPEED CONTROL:
BRAKING SYSTEM:
P
RODUCTIVITY
SCRUBBING WIDTH:
SCRUBBING RATE/HOUR (NORMAL):
SCRUBBING RATE/HOUR (MAXIMUM):
W
ARRANTY
PARTS:
LABOR:
TANKS:
chadv
11/23/2005 9:54:13 AM