To Next PageTo Next Page
Need help?Do you have a question about the Factory Cat Pilot and is the answer not in the manual?
Explains safety alert types and important label locations on the machine.
Details controls on Military, Legacy, and Touch Screen dashboards.
Describes controls on the side panels for different machine grades.
Explains the different display screens available on the Legacy LCD.
Overview of the touch screen interface and its elements.
Identifies and explains controls located on the steering column.
Identifies and describes components within the service cabinet.
Instructions for removing and replacing disk and cylindrical brushes.
Common diagnostic codes for P&G and Touch Screen controllers.
Explains status light indicators for the Military Grade Central Command.
Step-by-step guide for setting up the machine's batteries.
Instructions for safely transporting the machine forward.
Instructions for safely transporting the machine in reverse.
Procedure for filling the machine's solution tank.
Guidance on performing scrubbing operations with the machine.
Procedure for emptying the machine's recovery tank.
Procedure for emptying the machine's solution tank.
Instructions on how to properly engage the parking brake.
General| Model | Pilot |
|---|---|
| Power Source | Battery |
| Run Time | Up to 3.5 hours |
| Battery Voltage | 24V |
| Cleaning Path Width | 20 inches |
| Brush Motor | 0.75 HP |
| Brush Width | 20 in / 505 mm |
