EasyManua.ls Logo

Faema Diplomat E91/A - Page 38

Faema Diplomat E91/A
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EnglishEnglish
4.5 Start/end operations settings - start period(Saturday)
start period
00:00 sat 24:00
To program the activate and duration time for Saturday follow the
procedures in Paragraph 4.
4.6 Start/end operations settings - start period (Sunday)
start period
00:00 sun 24:00
To program the activate and duration time for Sunday follow the
procedures in Paragraph 4.
How to perform other operations
When the PROG (35) key is pressed, the message counter selection
is displayed (See Paragraph 5).
5. Display and reset of partial counters - counter selection
CONTATORI SELEZIONI
The following message will be displayed:
If the displayed key is kept depressed and any one other distribution
key is pressed, the counter of this key will be reset and the following
displayed:
number of selection
press a key
If any one of the distribution keys are pressed (coffee, cappuccino,
milk or hot water), the number of distributions made with that key will
be displayed. For example:
number of selection
000106
number of selection
000000
To display and reset the counters of the other distribution keys,
repeat the above procedures.
N.B. To obtain the exact number of coffee cups distributed, the 2-
coffee cup key counters (37 and 39 of each distribution group) must
be multiplied by 2.
How to perform other operations
When the PROG (35) key is pressed, the message no. of coffees
is displayed (See Paragraph 6).
6 Display and reset the total counters - no. of coffees
No. OF COFFEES
The following message will be displayed:
If the
444
(71) key is kept pressed down, the counter is reset and
the following will be displayed:
This counter represents the number of distributions with coffee,
including the coffee doses for the cappuccinos.
no: coffee: 000347
reset press >>>
no: coffee: 000000
reset press >>>
How to perform other operations
When the PROG (35) key is pressed, the message no. of water is
displayed (See Paragraph 6.1).

Related product manuals