Faema E92/A Compact - Engineer Programming Data Management; Loading Technician Data; Saving Technician Data

EnglishEnglish
engineer
Key reading
Code: XX Series: XX
4
*
*
2. Programming
First frame: place the key on sensor (7) to quit programming in order
prevent the user from programming the machine in technician mode.
Place the key on the sensor (7). The keys code
and series reference are displayed so that another
key can be ordered.
Press key
444
( 33), The following
message is shown on the display
(14):
Key Reading
Data IN NO
4
To load the data, place the TECHNICIAN key on sensor (7) and press
the + (34) key until the operation is completed.
Press key
444
( 33), The following
message is shown on the display
(14):
Key Reading
Data OUT NO
4
To save the data, place the TECHNICIAN key on sensor (7) and
press the + (34) key until the operation is completed.