EnglishEnglish
number of selection
000000
number of selection
press a key
start period
00:00 wed 24:00
start period
00:00 thu 24:00
start period
00:00 fri 24:00
start period
00:00 sat 24:00
start period
00:00 sun 24:00
number of selection
000106
5. Display and reset of partial counters - counter selection
CONTATORI SELEZIONI
The following message will be displayed:
If the displayed key is kept depressed and any one other distribution
key is pressed, the counter of this key will be reset and the following
displayed:
If any one of the distribution keys are pressed (coffee, cappuccino,
milk, hot water or steam), the number of distributions made with that
key will be displayed. For example:
To display and reset the counters of the other distribution keys, repeat
the above procedures.
N.B. To obtain the exact number of coffee cups distributed, the 2-
coffee cup key counters (27 and 29 of each distribution group) must be
multiplied by 2.
How to perform other operations
When the FRAME DISPLAY (31) key is pressed, the message no. of
coffees is displayed (See Paragraph 6).
To program the activate and duration time for Sunday follow the
procedures in Paragraph 4.
How to perform other operations
When the FRAME DISPLAY (31) key is pressed, the message counter
selection is displayed (See Paragraph 5).
4.6 Start/end operations settings - start period (Sunday)
4.5 Start/end operations settings - start period (Saturday)
To program the activate and duration time for Saturday follow the
procedures in Paragraph 4.
4.4 Start/end operations settings - start period (Friday)
To program the activate and duration time for Friday follow the
procedures in Paragraph 4.
4.3 Start/end operations settings - start period (Thursday)
To program the activate and duration time for Thursday follow the
procedures in Paragraph 4.
4.2 Start/end operations settings - start period (Wednesday)
To program the activate and duration time for Wednesday follow the
procedures in Paragraph 4.
To Next Page
Loading...
