EN
Step 3: Head light and front fender installation.
A.Loosen the front light fixing screw on the front
fork. Put the front fender with the head light
together. Adjust the head light to desired position,
tighten the screw with a hex key and a wrench.
B.Align front fender to the screw holes, use a hex
key to tighten front fork screws.
Step 4: Front wheel installation.
Take out the front wheel and remove the
protective guard. And remove the fork protective
cover. Loosen the front axle nuts and place the
front suspension fork onto the front Wheel.
Ensure the brake rotor is between the brake pads
of the brake caliper. Use an open wrench to
tighten the axle nuts.
To Next Page
Loading...
