EN
INSTALLATION INSTRUCTION
NOTICE: The following steps are only a general guide to assist in the assembly of your ebike and are not a
complete or comprehensive manual of all aspects of assembly, maintenance, and repair. Consult a certified,
reputable bike mechanic to assist with assembly, repair, and maintenance of your ebike.
Step 1: Unpack the bike.
Open the bike box. With the help of another person capable of safely lifting a heavy object, remove the
ebike from the bike box. Carefully remove the packaging material protecting the bike frame and
components. In the small box, there are your charger and accessories. Please recycle packaging
materials especially cardboard and foam whenever possible.
Step 2: Handlebar installation.
A.Remove all the protective foams, and
then place the bicycle as shown.
B.Loosen the 4 screws of the handlebar stem, place the
handlebar and adjust the horizontal angle of the
handlebar, and then fix it with a hex key.
C.Tighten each fixing screw with a hex key to ensure that there is no looseness of the handlebar.
To Next Page
Loading...
