EN
INSTALLATION INSTRUCTION
NOTICE: The following steps are only a general guide to assist in the assembly of your ebike and are not a
complete or comprehensive manual of all aspects of assembly, maintenance, and repair. Consult a certified,
reputable bike mechanic to assist with assembly, repair, and maintenance of your ebike.
Step 1: Unpack the bike.
Open the bike box. With the help of another person capable of safely lifting a heavy object, remove the
ebike from the bike box. Carefully remove the packaging material protecting the bike frame and
components. In the small box, there are your charger and accessories. Please recycle packaging
materials especially cardboard and foam whenever possible.
Step 2: Handlebar installation.
A.Remove all the protective foams, and
then place the bicycle as shown.
B. Insert the handlebar into the tube. Fix the handlebar at
the proper height and lock it.
Step 3: Saddle installation.
Insert the seat post into the tube. Fix the seat post at the
proper height and lock it. Please note that the height of the
seat post cannot exceed the highest scale line indicated on
the seat post.
To Next Page
Loading...
