Why won't my Fagor 3LVF-438ADX start?
Your Fagor Dishwasher might not be starting because the door isn't fully closed. Ensure the door is carefully and completely closed. Also, check the connection to the power supply. If the Child Lock is enabled, deactivate it.
What to do if Fagor 3LVF-438ADX dishes are not clean enough?
If your dishes aren't getting clean enough in your Fagor Dishwasher, consider these points: First, ensure the water pressure is normal. Second, check that the dishwasher is connected to a hot water supply and avoid using hot water elsewhere while the dishwasher is running. Third, rearrange dishes so they aren't too close together and use the correct amount and type of detergent. Fourth, select a more intensive wash program if needed. Finally, check that the spray arm rotates freely.
Why does the Fagor Dishwasher wash cycle take so long?
The wash cycle of your Fagor Dishwasher may be longer than expected due to several reasons. Check if the dishwasher is correctly connected to the hot water supply. The wash programme duration varies depending on how soiled the dishes are; auto and normal programmes extend the wash cycle when heavy soil is detected. If the disinfection option is selected, the wash cycle time will be extended to reach the disinfection temperature.
General| Type | Freestanding |
|---|---|
| Number of temperature settings | 5 |
| Width | 60 cm |
| Place settings | 14 |
| Delay start | Yes |
| Half load option | Yes |
| Programs | Eco, Intensive |
| Drying system | Condensation |
To Next Page
