To Next PageTo Next PageWhy my Fagor 3LVF-622IT won't start?
Your Fagor Dishwasher might not be starting due to several reasons: the door might not be completely closed, so ensure it is properly shut. The appliance might not be connected to the mains power or the Delay start function might be enabled, so close the door carefully, making sure it is closed fully. If the Child Lock is enabled (on selected models), turn it off.
What to do if my Fagor Dishwasher doesn't drain properly?
If your Fagor Dishwasher isn't draining properly, check the air trap for clogs. Also, make sure that the drain hose is correctly connected to the drain and is not bent.
How to clean dishes better in my Fagor Dishwasher?
If your dishes aren't getting clean enough in your Fagor Dishwasher, it could be due to a few reasons. The water pressure might be temporarily low, so try running the dishwasher when the pressure is normal. Check that the dishwasher is connected to hot water. Also, avoid using the dishwasher when hot water is being used elsewhere in the house. Make sure that the spray arm rotates freely. Ensure dishes aren't too close together and that you're using the correct amount and type of detergent for your water hardness and wash program. If the selected wash program isn't strong enough, choose a more intensive one.
Why aren't my dishes dry after using my Fagor Dishwasher?
If your dishes aren't drying properly in your Fagor Dishwasher, check if the rinse aid dispenser is empty and fill it or increase the amount dispensed. Make sure dishes are arranged correctly according to the instructions. Also, verify that the wash program you selected includes a drying stage; if not, select one that does.
How to remove stains and deposits from dishes in my Fagor Dishwasher?
To remove stains and deposits from dishes in your Fagor Dishwasher, consider these points: If you have very hard water, think about installing a water softener. Ensure dishes are arranged correctly. Try using a new rinse aid, and make sure the rinse aid dispenser isn't empty. If you have soft water, use less detergent. Also, if the water supplied to the dishwasher is too hot (over 70°C), reduce the temperature.
Why does the wash cycle take so long on my Fagor 3LVF-622IT Dishwasher?
The wash cycle on your Fagor Dishwasher might be taking longer than expected due to a few factors. First, check that the dishwasher is properly connected to hot water. The duration of the wash programme varies depending on how soiled the dishes are, when heavy soil is detected, auto and normal programmes, automatically extend the wash cycle duration. Also, if the disinfection option has been selected, the wash cycle time will be extended to reach the disinfection temperature.
Why is my Fagor Dishwasher not filling with water?
If your Fagor Dishwasher isn't filling with water, first check that the water tap is open. Also, make sure that the door is closed properly to engage the door lock.
Why is detergent not fully released from the dispenser in my Fagor 3LVF-622IT Dishwasher?
If the detergent isn't fully released from the dispenser in your Fagor Dishwasher, it could be because the detergent is too old; try using a new detergent. Additionally, ensure that the spray arm rotation is not restricted by rearranging the dishes.
Why is my Fagor Dishwasher leaking?
If your Fagor Dishwasher is leaking, it could be due to using the wrong detergent, which can result in a deposit. Make sure that the detergent used is suitable for dishwashers. Also, check if the dishwasher is leveled properly and level it if necessary.
Why is there foam in my Fagor 3LVF-622IT Dishwasher?
If you see foam in your Fagor Dishwasher, it's likely because the wrong detergent was used. Ensure that the detergent you're using is specifically made for dishwashers.
General| Type | Freestanding |
|---|---|
| Size | Full-size |
| Capacity | 12 place settings |
| Number of programs | 6 |
| Noise level | 49 dB |
| Delay start | Yes |
| Half load | Yes |
| Drying system | Condensation |
| Dimensions (HxWxD) | 850x600x600 mm |
