To Next PageTo Next PageWhat to do if Fagor 3LVF-635AD doesn't drain water properly?
If your dishwasher isn't draining properly, check the air trap for clogs and ensure the drain hose is correctly connected and not bent.
Why are my dishes not clean enough in my Fagor Dishwasher?
If your dishes aren't coming out clean, several factors could be at play. It could be due to temporarily low water pressure; try using the dishwasher when the pressure is normal. The inlet water temperature might be too low, so ensure the dishwasher is connected to hot water and avoid using hot water elsewhere while the dishwasher is running. Also, check if the dishes are too close together, if you're using the correct amount and type of detergent, and if the selected wash program is appropriate for the soil level on your dishes. Finally, make sure the spray arm can rotate freely.
What to do if dishes are not dry enough in Fagor Dishwasher?
If your dishes aren't drying properly, first check if the rinse aid dispenser is empty and fill it, or increase the dispensed amount. Make sure dishes are arranged correctly within the dishwasher. Finally, ensure that you've selected a wash program that includes a drying stage.
How to remove black or grey streaks on dishes from Fagor Dishwasher?
If you notice black or grey streaks on your dishes, it's likely due to aluminum dishes rubbing against the plates. Rearrange the dishes to prevent this contact.
Why is detergent not fully released from dispenser in Fagor Dishwasher?
If the detergent isn't fully released from the dispenser, it could be too old, so try using a new detergent. Also, make sure the spray arm isn't blocked, preventing it from properly distributing the detergent; rearrange the dishes to ensure free rotation.
Why Fagor 3LVF-635AD does not fill with water?
If the appliance isn't filling with water, check that the water tap is open and ensure that the door is closed properly.
Why is the rinse aid indicator on in my Fagor 3LVF-635AD Dishwasher?
If the rinse aid indicator is on, simply add more rinse aid.
Why is my Fagor Dishwasher leaking?
If your dishwasher is leaking, it could be due to using the wrong detergent, which results in a deposit. Be sure to use a detergent suitable for dishwashers. Also, ensure that the dishwasher is level.
Why is there foam in my Fagor 3LVF-635AD Dishwasher?
If you see foam in your dishwasher, it's likely because the detergent used is not suitable for dishwashers. Ensure you're using a dishwasher-specific detergent.
Why is my Fagor Dishwasher so noisy?
Some noise is normal, such as the detergent dispenser lid opening or the water drain pump operating. If the noise continues after a full wash cycle or if you suspect a hard object is causing the noise, call for service.
General| Type | Freestanding |
|---|---|
| Noise level | 49 dB |
| Delay start | Yes |
| Half load option | Yes |
| Dimensions (HxWxD) | 85 x 60 x 60 cm |
| Weight | 47 kg |
| Size | Full-size |
| Drying system | Condensation |
