ERROR CODES AND TROUBLESHOOTING
In the event of a fault, the dishwasher displays error codes that identify the problem:
If overow occurs, turn o the main water valve before calling for service.
If there is water in the bottom tray due to overow or a small leak, empty the water before starting the
dishwasher.
E1 Longer inlet time.
Faucets is not opened, or water
intake is restricted,or water pressure
is too low.
E3
Not reaching required
temperature.
Malfunction of heating element.
E4 Overow. Some element of dishwasher leaks .
E8
Failure of orientation
of distributary valve.
Open circuit or break of distributary
valve.
Ed
Failure of communication
between main PCB with
display pcb.
Open circuit or break wiring for the
communication.
To Next Page
Loading...
