ERROR CODES AND TROUBLESHOOTING
In the event of a fault, the dishwasher displays error codes that identify the problem:
E1 Longer inlet time.
Faucets is not opened, or water
intake is restricted,or water pressure
is too low.
E3
Not reaching required
temperature.
Malfunction of heating element.
E4 Overow. Some element of dishwasher leaks .
E6 Failure of temperature sensor. Open circuit of the thermistor.
E7 Failure of temperature sensor. Short circuit of the thermistor.
If overow occurs, turn o the main water valve before calling for service.
If there is water in the bottom tray due to overow or a small leak, empty the water before starting the
dishwasher.
To Next Page
Loading...
