EasyManua.ls Logo

Fagor 3LVF-638ADX - Page 100

Fagor 3LVF-638ADX
118 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...

Warning: Use only rinse aid designed for domestic dishwashers. Wipe up spilled rinse aid
with a cloth as it will cause the formation of large amounts of foam, and thus will reduce
the dishwashing eectiveness.
If the water hardness is higher than the maximum values given in the table above, or if you use water
from a deep well, it is recommended to use lters and water treatment equipment.
NOTE: The factory settings are for the water hardness level 3.
Water hardness table
Water hard-
ness
German
degrees
[dH]
French
degrees
[dF]
British
degrees
[dE]
Water hardness level indicator
Special salt
consumption
[g/cycle]
1 0 ~ 5 0 ~ 9 0 ~ 6
H1
0
2 6-11 10-20 7-14
H2
9
3 12-17 21-30 15-21
H3
12
4 18-22 31-40 22-28
H4
20
5 23-34 41-60 29-42 H5 30
6 35-55 61-98 43-69 H6 60

Use a detergent for domestic dishwashers. On
the market you can nd detergent intended for
dishwashers in the form of powder, gel and tablets.
The detergent must be placed in the dispenser
before starting the dishwasher. Store detergent in a
cool and dry place, out of reach of children.
Do not overll the detergent dispenser, otherwise
the detergent may not dissolve completely and
leave streaks on the dishes.
If you need more information on the detergent
used, please contact the manufacturer directly.
1. Open the door and switch on the appliance;
2. Press the Program button for more than 5 se-
conds to start the water softener set
model within 60seconds after the appliance was
switched on;
3. Press the Program button to select the proper
set according to your local environment, the sets
will change in the following sequence:
H1->H2->H3->H4->H5->H6;
4. Press the On/O button to end the set up model.

Related product manuals