OPERATION
Use the sensors to adjust End Time in
1 minute steps.
Touch
the actual start time will be displayed.
seconds the appliance will enter standby and
the and symbols will be displayed along
with current time.
Touch to turn on the appliance and display
the entered settings.
Appliance operation in selected mode
When the current time reaches the Start Time,
the appliance will start the selected heating
function.
display shows end time and the time remain-
ing to end time is displayed on the bar below
the actual end time. When the appliance starts
the symbol is on.
When the time has elapsed you will hear a
beep and the
to mute the beeping. The appliance switches
to standby mode.
Pre-set programmes
Select
menu and touch The following items will
be available:
- MEAT
When you select a programme and touch
be available:
MEAT
-
Use the sensors to select the desired
menu and touch
temperature at any time, however this will end
the pre-set programme.
TEMPERATURE TEMPERATURE
PORK
When you adjust the temperature (the or
59
To Next Page
Loading...
