CLEANING AND MAINTENANCE
Replacing the halogen bulb in the oven
Before replacing the halogen bulb, make
sure the appliance is disconnected from
the electric mains to avoid a possible
electric shock.
1. Unplug the appliance
2. Remove shelves and trays from the oven.
3. If the oven has telescopic runners, re-
move them also.
4. Use a at screwdriver to pry the lamp
cover loose, remove it, wash and carefully
wipe it dry.
5. Pull the halogen bulb out by sliding it
down using a cloth or paper. If necessary,
replace the halogen bulb with a new one.
- type G9
- voltage 230V
- power 25W
6. Replace the halogen bulb in its socket.
7. Replace the lamp cover
By ensuring proper cleaning and maintenance
-
ence on the continuing fault-free operation of
your appliance.
the oven has completely cooled.
● The oven should be cleaned after every
use. When cleaning the oven the lighting
should be switched on to enable you to
see the surfaces better.
● The oven chamber should only be washed
with warm water and a small amount of
washing-up liquid.
● After cleaning the oven chamber wipe it dry.
Important!
Do not use any abrasive agents, harsh de-
-
ders or creams.
71
To Next Page
Loading...
Need help?
General
