ENGLISH MANUAL FOR USE AND MAINTENANCE ADVANCE PLUS
27
COOKING WITH TIME FUNCTION
Cooking is according to the temperature and time selected.
6. Select the operating mode.
7. Select the humidity value.
8. Select the required oven temperature.
9. Select the required time
10. Press Start.
The up /down buttons allow the chamber temperature and time settings to be
changed. If either of the buttons is pressed for more than 2 seconds, the increase /
decrease is in steps of 10.
If the oven is on and either of these two buttons is pressed, the remaining time will vary
in the same proportion as the temperature setting is increased / decreased.
PREHEATING
To preheat the oven it must be switched off and the required temperature must be
higher than the temperature in the chamber.
6. Select the operating mode.
7. Select the required oven temperature.
8. Press time / spike / Delta display
9. Select time 0 and press ok.
10. Press Start.
To Next Page
Loading...
