Conversational mode
107
Description of the conversation mode auxiliary
screen.
1. Softkey for selecting units mm/inches.
2. Softkey to go into tool inspection.
3. Softkey to access the graphics in execution mode.
4. Softkey for selecting offsets.
5. Softkey for tool calibration.
6. Window that shows the status of the functions G, F,
T, D, M. It also shows the identifiers that a high-level
command has been programmed, such as FIX, KIN,
CS...
7. Window that displays information on the selected
tool.
8. Window that displays information on the feedrate of
the axis that is selected.
9. Window that shows the value of the variables Partc,
CyTime, Timer.
10. Window showing spindle related information:
11. Message bar.
12. Window with spindle related information:
• Theoretical speed.
• Speed in RPM.
• Speed in m/min.
13. Window with axis related information:
• COMMAND.
• ACTUAL.
• TO GO.
14. Window that shows the lines of the program being
executed.
To Next Page
Loading...
