Work modes
14
Manual home search (one axis at a time)
The axis-by-axis home search cancels the zero offset, the
fixture offset and the measuring offset. The CNC assumes the
machine reference zero point (home) as the new part zero.
Keyboard.
1. Select the axis to be homed (on alphanumeric
keyboard). The CNC will highlight the coordinate of
that axis.
2. Press the homing key [ZERO]. The CNC will display
the symbol “1” in the numeric area.
3. Press [START] to go ahead with the home search or
[ESC] to cancel the operation.
Softkey menu.
1. Press the home search softkey to show the list of axes
of the channel.
2. Select the axis to be homed on the softkey menu. The
CNC will highlight the coordinate of that axis and will
show the symbol “1” in the numeric area.
3. Press [START] to go ahead with the home search or
[ESC] to cancel the operation.
To Next Page
Loading...
