High level language
159
#CSROT OFF
Cancel tool orientation in the part coordinate
system.
#CYL
"C" axis. Machining of the turning side of the
part.
#DEF
Macros. Define a macro.
#DEFROT
How to manage the discontinuities in the
orientation of rotary axes.
#DELETE
It initializes the global user variables.
#DFHOLD
Disable the feed-hold signal.
#DGWZ
Define the size of the graphics area.
#DSBLK
Cancel the single-block treatment.
#DSTOP
Disable the cycle stop signal.
#EFHOLD
Disable the feed-hold signal.
#ERROR
Display an error on the screen.
#ESBLK
Activate the single-block treatment.
#ESTOP
Enable the cycle stop signal.
#EXBLK
It executes a block in the indicated channel.
#EXEC
It executes a program in the indicated
channel.
#FACE
"C" axis. Machining on the face of the part.
#FLUSH
Interrupt block preparation.
#FOLLOW OFF
Independent axis. End the synchronization
movement.
#FOLLOW ON
Independent axis. Begin the synchronization
movement (real coordinates).
#FREE AX
Remove an axis from the configuration of the
channel.
#FREE SP
Remove a spindle from the configuration of
the channel.
#HSC OFF
Cancel the HSC mode.
#HSC ON
Activate the HSC mode. Optimizing the
contouring error.
#HSC ON
[FAST]
Activate the HSC mode. Optimizing the
machining speed.
#INCJOG
Manual intervention. Feedrate in incremental
jog.
#INIT
MACROTAB
Macros. Initialize the table of macros.
#KIN ID
Select a kinematics.
Instruction Meaning
To Next Page
Loading...
