High level language
160
#KINORG
Transform the current part zero considering
the position of the table kinematics.
#LINK
Activate the electronic coupling (slaving) of
axes.
#MASTER
Selecting the master spindle of the channel.
#MCS
Program a movement referred to machine
zero.
#MCS OFF
Cancel the machine coordinate system.
#MCS ON
Activate the machine coordinate system.
#MDOFF
Turning the subroutine into non-modal.
#MEET
Channels. Activate the mark in the indicated
channel.
#MOVE
Independent axis. Positioning move.
#MPG
Manual intervention. Resolution of the
handwheels.
#MSG
Display a message on the screen.
#OPEN
Create a new file or open an existing file.
#PARK
Park an axis or spindle.
#PATH
Define the folder that contains the global
subroutines.
#POLY
Polynomial interpolation.
#PROBE 1
(·M· model). Tool calibration (dimensions and
wear).
(·T· model). Tool calibration.
#PROBE 2
(·M· model). Probe calibration.
(·T· model). Tabletop probe calibration.
#PROBE 3
(·M· model). Surfacing measuring.
(·T· model). Part measurement along the
ordinate axis.
#PROBE 4
(·M· model). Outside corner measuring.
(·T· model). Part measurement along the
abscissa axis.
#PROBE 5
(·M· model). Inside corner measuring.
#PROBE 6
(·M· model). Angle measurement on the
abscissa axis.
#PROBE 7
(·M· model). Outside corner and angle
measurement.
#PROBE 8
(·M· model). Hole measuring.
Instruction Meaning
To Next Page
Loading...
