High level language
162
#TANGCTRL
SUSP
Freeze tangential control.
#TANGFEED
RMIN
Minimum radius for applying constant
tangential feedrate.
#TCAM ON
Activate the electronic cam (theoretical
coordinates).
#TFOLLOW
ON
Independent axis. Begin the synchronization
movement (theoretical coordinates).
#TIME
Dwell.
#TLC
Correct the implicit tool length compensation
of the program.
#TOOL AX
Select the longitudinal axis of the tool.
#TOOL ORI
Tool perpendicular to the inclined plane.
#TSYNC
Spindle synchronization based on the
theoretical coordinate.
#UNLINK
Cancel the electronic coupling (slaving) of
axes.
#UNPARK
Unpark an axis or spindle.
#UNSYNC
Cancel the spindle synchronization.
#VIRTAX ON
Activate the virtual tool axis.
#VIRTAX OFF
Cancel the virtual tool axis.
#WAIT
Channels. It waits for a mark to be activated
in the indicated channel.
#WAIT FOR
Wait for an event before resuming execution.
#WARNING
Display a warning on the screen.
#WARNINGST
OP
Display a warning on the screen and interrupt
the program.
#WRITE
Edit a block in a file already created or opened
using the instruction #OPEN.
Instruction Meaning
To Next Page
Loading...
