ISO language
55
G91
* ? * Programming in incremental coordinates.
G91
Note: G91 affects all the coordinates in the block.
XvalueI affects the non-modal programmed axis
and it is non-modal.
G92
! * Zero offset. Coordinate preset.
G92 X...Y...Z...A...B...C...U...V...W...
X...
~ W ...: zeroing of the axis in the position
where the machine is located (the programmed
coordinate may be 0 or another value)
G93
* * Feedrate in seconds/block.
G93 F...
F ...: time in seconds for the programmed
movement
G94
* ? Feedrate in millimeters/minute
(inches/minute).
G94 F...
F...: feedrate in millimeters/minute or
inches/minute.
G95
* ? * Feedrate in millimeters/revolution
(inches/revolution).
G95 F...
F...: feedrate in millimeters/revolution or
inches/revolution.
G96
* * Constant surface speed.
G96 S...
S...: constant surface speed (CSS) in
meters/minute
G97
* * Constant turning speed.
G97 S...
S...: constant surface speed of spindle in in
revolutions/minute.
Function M D V Meaning
To Next Page
Loading...
