ISO language
56
G100
* Probing until making contact.
G100 Axis1... axis2... ... Axis n... F...
axis1...
~ Axis n: position value of probing point
F...: movement speed (optional)
G101
* Include probe offset.
G101 Axis1... axis2... ... Axis n...
axis1...
~ Axis n: axis whose theoretical
position value is included in the resulting offset
of the measurement
G102
* Exclude probe offset.
G102 Axis1... axis2... ... Axis n...
axis1...
~ Axis n: optional, axis whose
theoretical position value is not included in the
resulting offset of the measurement
G103
* Probing until not making contact.
G103 Axis1... axis2... ... Axis n... F...
axis1...
~ Axis n: position value of probing point
F...: movement speed (optional)
G104
Probe movement up to the programmed
position.
G104
Note: Function G104 must be programmed
together with a G100 or G103 probe movement;
otherwise, it will be ignored.
Examples: G100 G104 Z23.45
G103 G104 Z1 F20
G108
* * Blend the feedrate at the beginning of the
block.
See:
G193
G108
G109
* Blend the feedrate at the end of the block.
See:
G193
G109
Function M D V Meaning
To Next Page
Loading...
