ISO language
57
G112
* Changing of parameter range of an axis.
G112 X1...4 Y1...4 Z1...4 S1...4
X1...4
~ W1...4: n a m e o f t h e a x i s a n d p a r a m e t e r
set (between 1 and 4)
G130
* * Percentage of acceleration to be applied
per axis or spindle.
See:
#SLOPE
G130 X...Y...Z...A...B...C...U...V...W...S...
X...
~ W...: acceleration percentage to be applied
per axis or spindle (S for spindle)
Example: G130 X50 Y75 Z100
X acceleration at 50%, Y at 75% and Z at 100%
G131
* * Percentage of acceleration to be applied,
global.
See:
#SLOPE
G131 ...
...: acceleration percentage to be applied for all
axes and spindle
Example: G131 100
all axes and spindles at 100% of the selected
acceleration
G132
* * Percentage of jerk to be applied per axis
or spindle.
See:
#SLOPE
G132 X...Y...Z...A...B...C...U...V...W...S...
X...
~ W...:jerk percentage to be applied per axis
or spindle (S for spindle)
Example: G132 X50 Y75 Z100
X jerk at 50%, Y at 75% and Z at 100%
G133
* * Percentage of jerk to be applied, global.
See:
#SLOPE
G133 ...
...: jerk percentage to be applied for all axes and
spindle
Example: G133 100
all axes and spindles at 100% of the selected jerk
Function M D V Meaning
To Next Page
Loading...
