ISO language
60
G171
* * Activate Hirth axes.
G171 A...B...C...
A...B...C...: Hirth axis to activate and activation
order number
Example: G171 C1 B2: first activate axis C and
then axis B
G174
* Set the machine coordinate.
G174 X...Y...Z...A...B...C...U...V...W...S...
X...
~ W...: set the machine coordinate for the
axis (the position is programmed for a single
axis)
S...: set the machine coordinate for the spindle
G180
G189
* Execution of OEM subroutines.
See:
G380-G399
G180 ~ G189 P0=... P1=... ~ P99=...
G180
~ G189 A... B... ~ Z...
P0=...
~ Pn=...: local parameters of the
subroutine, optional
Example: G183 P1=12.3 P2=6
Note: these are functions that the manufacturer
can use for its specific functions; it is possible
that they are not present.
G192
* * Turning speed limitation.
G192 Sn=...
G192 S...
For multiple spindles, n=spindle number.
The limit is programmed in rpm.
G193
* Interpolate feedrate during the block.
See:
G108
G109
G193
Note: when programming function G193, the
adaptation to the new feedrate is interpolated
linearly during the movement programmed in
the block.
Function M D V Meaning
To Next Page
Loading...
