ISO language
61
G196
* * Constant tangential feedrate.
G196
Note: after executing function G196, the CNC
interprets that the programmed "F" corresponds
to the contact point between the tool and the
part.
G197
* * Constant feedrate of the tool center.
G197
Note: after executing function G197, the CNC
interprets that the programmed "F" corresponds
to the tool center. This means that the feedrate
at the cutting point increases on inside arcs and
decreases on outside arcs.
G198
Set lower software travel limits.
G198 X... ~ W...
X...
~ W...: lower software limit for the
movement of the axes
G199
Set upper software travel limits.
G199 X... ~ W...
X...
~ W...: upper software limit for the
movement of the axes
G200
Exclusive manual intervention.
G200
Note: interrupts the program execution to
activate the manual mode for all axes.
G201
* Activate additive manual intervention.
G201 #AXIS [X ~ W, ... ]
Example: G201 #AXIS [X, Z]
Note: jogging can be performed while the
programmed movements are executed.
Function M D V Meaning
To Next Page
Loading...
