ISO language
50
G06
* Arc center in absolute coordinates (not
modal).
See:
G261
G262
G06 G02 ...
G06 G03 ...
G07
* ? * Square corner (modal).
See:
G60
G07
G08
* Arc tangent to previous path.
G08 X...Y...[R...Q...]
X...Y...: cartesian coordinates of the end point of
the arc
R...Q...: polar coordinates of the final point of the
arc
G09
* Arc defined by three points.
G09 X...Y...[R...Q...] I...J...
X...Y...: cartesian coordinates of the end point of
the arc
R...Q...: polar coordinates of the final point of the
arc
I...J...: coordinates of the intermediate point of
the arc (for both cartesian points and polar
points)
G10
* * Cancel mirror image on all the axes.
G10
G11
* * Mirror image on the abscissa axis.
G11
Note: if it has been programmed along with
another mirror image, for example: G11 G12:
mirror image on X and Y.
G12
* * Mirror image on the ordinate axis.
G12
Note: if it has been programmed along with
another mirror image, for example: G11 G12:
mirror image on X and Y.
Function M D V Meaning
To Next Page
Loading...
