ISO language
51
G13
* * Mirror image on the axis perpendicular to
the plane.
G13
Note: if it has been programmed along with
another mirror image, for example: G11 G13:
mirror image on X and Z.
G14
* * Activate or cancel mirror image on a axis.
G14 X+/-1 Y+/-1 ..etc...
Axis with negative value: enable mirror image
Axis with positive value: disable mirror image
G17
* ? * Main plane formed by the first axis
(abscissa), second (ordinate) and third
axis (perpendicular) of the channel.
G17
G18
* ? * Main plane formed by the third axis
(abscissa), first axis (ordinate) and
second axis (perpendicular) of the
channel.
G18
G19
* * Main plane formed by the second axis
(abscissa), third axis (ordinate) and first
axis (perpendicular) of the channel.
G19
G20
* * Select any work plane formed by the first
three axes of the channel.
See:
#SET AX
G20 Axix1 1 Axis2 2 Axis3 3 ...
Axis1 1: axis defined as abscissa
Axis2 2: axis defined as ordinates
Eje3 3: perpendicular axis
Etc...
Example: G20 X1 Z2 Y3
X abscissa; Z ordinates; Y perpendicular.
Function M D V Meaning
To Next Page
Loading...
