14
• When there is enough froth, push the
steam button (5) again and turn the
function selector to the position.
• When nished making froth, the steam
button (5) and hot water (4) indicator
lights will begin to ash. This means
that the temperature of the thermoblock
system is too high to make coffee and
must be cooled down. Leave the machine
to cool down for a few minutes.
8. HOT WATER
• Follow the steps in section 5.
“Preparation for start-up”
• When the indicator light (7) is xed on,
push the hot water button (4). The hot
water indicator light will begin to ash.
• When the hot water indicator light (4)
stops ashing and remains on, the
machine is at the correct temperature to
generate hot water.
• Place the steam tube (12) into a
container for hot water and turn the
function selector (6) to the position.
Hot water will begin to dispense ( g. K).
• When there is enough hot water, push
the hot water button (4) again.
• Move the function selector (6) to the
position.
• When nished making froth, the steam
button (5) and hot water (4) indicator
lights will begin to ash. This means
that the temperature of the thermoblock
system is too high to make coffee
and must be cooled down. Leave the
machine to cool down for a few minutes.
9. CLEANING AND MAINTENANCE
Be sure that the machine is unplugged and
cold before carrying out any washing or
maintenance procedures.
Never submerge the machine in hot water or
use abrasive or solvent cleaning products.
• Clean the machine with a soft damp
cloth and then dry it.
• Wash the water tank (2), the lter holder
(9), the drip tray grille (11), the drip tray
container (19) and the lters (15 and 16)
with warm water and mild soap.
• Clean the steam nozzle (12) with a damp
cloth.
10. INFORMATION FOR THE CORRECT
DISPOSAL OF ELECTRICAL AND
ELECTRONIC APPLIANCES
At the end of its working
life, the product must not be
disposed of as urban waste.
It must be taken to a special
local authority differentiated
waste collection centre or to
a dealer providing this service. Disposing
of a household appliance separately
avoids possible negative consequences
for the environment and health deriving
from inappropriate disposal and enables
the constituent materials to be recovered
to obtain signi cant savings in energy and
resources.
To remind you that you must collaborate
with a selective collection scheme, the
symbol shown appears on the product
warning you not to dispose of it in traditional
refuse containers.
For further information, contact your local
authority or the shop where you bought the
product.
To Next Page
Loading...
