Why lights on but motor not working in my Fagor Ventilation Hood?
If the lights are on but the Fagor Ventilation Hood motor isn't working, the vent might be blocked, so remove the blockage. Alternatively, the capacitor could be damaged, requiring a replacement. A jammed motor with bearing damage or a bad smell from the motor that stops suddenly may indicate the need to replace the motor.
What to do if my Fagor Ventilation Hood is shaking?
If the Fagor Ventilation Hood is shaking, the vent might be damaged, requiring a replacement. Another possibility is that the motor isn't tightly attached; ensure you lock the motor tightly. Also, check if the chimney is not tightly hanged and attach the chimney tightly.
How to fix oil leakage in my Fagor Range Hood?
If you notice oil leakage from your Fagor Ventilation Hood, the damper and air ventilation entrance may not be tightly sealed; take down the damper and seal with glue. Another potential source is leakage from the connection of the U-shaped section and cover; take the U-shaped section down and seal it.
Why is my Fagor Ventilation Hood inclining to one side?
If the Fagor Ventilation Hood inclines to one side, the fixing screw may not be tight enough; tighten the fixing screw to make it horizontal. Another possibility is that the mounting screw isn't tight enough; tighten the mounting screw and make it horizontal.
General| Type | Wall Mount |
|---|---|
| Lighting | LED |
| Filter Type | Aluminum Mesh |
| Material | Stainless Steel |
| Venting Options | Ducted / Ductless |
| Width | 30 inches |
| CFM | 400 CFM |
| Number of Fan Speeds | 3 |
| Noise Level | 65 dB |
General warnings to reduce the risk of fire, electric shock, or injury to persons.
Specific safety instructions for handling range top grease fires, including what to do and what not to do.
Precautions regarding fire risk, air exhaust, cleaning agents, and motor operation.
Critical safety warnings and installation guidelines related to grounding and hood placement.
Detailed instructions for physically mounting and securing the hood unit.
Troubleshooting steps for when the lights are on but the motor is not functioning.
To Next Page
