21
EN
STUBBY
• Switch the Trimmer ON.
• To trim in the most effective way, move the Trimmer against
the direction of hair growth. Make sure the surface of the comb
always stays in contact with the skin (g. 5).
NOTE!
Since all hairs do not grow in the same direction, you
may want to try different trimming positions (i.e., upwards,
downwards, or across). Practice is best for optimum
results.
• If cut hairs have accumulated in the comb, turn Trimmer off,
remove the comb and blow and/or shake the hair out of the
comb (g. 6). The selected trimming length setting will not
change when you do this.
Trimming For 'Beard' Look
Be certain Beard Trimming Comb is on Trimmer and use setting 1 (3/64in/1mm) to result
in a 'Beard' look.
Trimming Without the Beard Trimming Comb
Remove comb if you are:
• Dening hair lines
• Trimming nape of neck
• Removing single, unwanted hairs
• Be certain the Trimmer is in the OFF position.
• Remove the Beard Trimming Comb by pulling it off the Trimmer (g. 8).
• Switch the Trimmer ON.
• Make well-controlled movements. Touch the hair/skin lightly with the Trimmer (g. 9).
To Next Page
Loading...
