*941367-00*
941367-00
Motorized Electric Latch Retraction
MEL 24/25 Series
Installation Instructions
1 Remove end cap
These instructions are for MEL conversion kits or MEL
devices with preinstalled motors.
Parts
Do not discard
MEL 6' cable with motor cable
(47269206)
MEL motor mounting
4-20 x ¹⁄₄" FHP screws (qty 2)
Motor cable
only
(114320)
MEL motor
assembly
MEL
cover plate
Allegion Connect accessories available to order
106198 MEL-CON adapter cable with 8-pin connector
040069 MEL motor cable + MEL-CON adapter cable with 8-pin
connector
If MEL is preinstalled in the device:
If installing the MEL conversion kit, follow
the instruction steps as written.
Mark and Prepare 2 Holes
a
b
c
#25
#10-24
Wood/Madera/Bois
Metal/Metal/Métal
¹⁄₈" (3 mm) x 1" (25 mm)
Follow original device instruction up to the point
where this end mounting bracket step has been
completed.
A.
Complete MEL wiring per steps 15-21 of this
instruction.
B.
Return to original device instruction at point you left
off, and complete installation.
C.
To Next Page
Need help?
General
